Bell and Gossett GDS Series Grinder Pumps

Bell and Gossett
GDS Series Grinder Pumps
* Overnight Shipping Available!
15GDS/20GDS Series Submersible Grinder Pump
Design: Capable of grinding municipal, commercial and industrial sewage.
Cutter System: Designed to reduce sewage to a fine slurry.
Impeller: Cast iron, semi-open, non-overloading multi-vane design with pump-out vanes for mechanical seal protection.
Casing: Cast iron, volute type for high efficiency. Adaptable for slide rail system.
Paint: Two coat paint system for superior surface protection.
Float Leakage Sensor (FLS): a small internal float switch is used to detect the presence of water in the stator chamber. Standard on all models. When activated and wired to a Mini CAS, the FLS will send an alarm and if desired, stop the motor.
Leakage Sensor Detector Circuit: The FLS must be connected to an optional, patented Mini CAS (Control and Status) monitoring unit mounted in the control panel.
Applications
Municipal
Commercial
Industrial

Key Features

• Cast Iron Design
• Severe Duty
• Thermal & Moisture Sensors Standard
• 1-1/2" & 2" Discharge
• Single or Three Phase
• 2 To 7.5 HP

Pump Express sells a variety of options for Bell and Gossett sewer ejector pumps. These pumps have practical applications in all settings, working mostly in conjunction with bathrooms and laundry rooms that are below public or private sewer lines. With the Bell and Gossett sewer ejector pumps provided through Pump Express, solids and liquids are able to be moved upward, allowing it all to be transferred into the main sewage system.

Additional Information (PDF):

GDS Series Grinder Pumps Specification
GDS Series Grinder Pumps Performance curves
GDS Series Grinder Pumps Product Brochure