Goulds MilliAmpMaster Mechanical Float Switch A2X33

Goulds
MilliAmpMaster Mechanical Float Switch
* Overnight Shipping Available! Part #:A2X33

Mechanically activated, snap-action, sealed gold cross-point contacts are designed to activate low current control panels and alarms. Narrow angle Control for Low Voltage AC or DC applications. Operate with differential of 45 above or below horizontal. Electrical Load low current non-arcing applications UL Listed for use in non-potable water and sewage. CSA Certified Mounting clamp for attaching to discharge pipe is standard. Not sensitive to rotation. Maximum submergence or water depth, 30 (9 meters), 13 psi. Flexible 18 gauge, 2 conductor SJOW water resistant cable. Impact and corrosion resistant, polypropylene float housing for use in sewage and water up to 140 F. Use with Intrinsically Safe Barriers (as used with explosionproof pumps), PLCs, solar applications and other low current control panel or alarm applications. Cable lengths of 10, 20 and 30. Standard order numbers are for Normally Open (NO) switches. Normally Closed (NC) or Pump Down switches are available as a special order by adding a U suffix. See Nomenclature on last page. Float comes with blue cap for easy identification.

Key Features

• 125 VAC Max. Load .1 amps (Min. Load .16 milliamps)
• 30 VDC Max. Load .1 amps (Min. Load .16 milliamps)
• 5 VDC - Minimum Load 1 milliamp
• Cord Length (ft.) - 20
• Mounting - strap

Storm water pump stations are necessary to remove the excess of water during a rainstorm. They not only remove water, but removes waste and other solid materials. Pump Express stocks several brands and types of storm water pumps.

Additional Information (PDF):

MilliAmpMaster Mechanical Float Switch Specification