BJM Slim-Line Top Discharge Dewatering Pump R100-115

BJM
Slim-Line Top Discharge Dewatering Pump
* Overnight Shipping Available! Part #:R100-115

R Series "Bullet" pumps are ideal for dewatering constructions sites, mines, circulating fountain water, or for all around use in industrial plants and utilities.

Top discharge allows for superior cooling of motor and provides a slim line design. 304SS Motor Housing provides superior abrasion resistance that will not wear out like aluminum motor housings when pumping sandy water. Three Seal Motor is protected by double mechanical seals lower seal is made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.

Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on. Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components. Will pump down to 1/12 th of an inch. A special diaphragm value prevents water backflow.

Key Features

• Horsepower - .15
• Volts - 115
• Amps - 2
• Phase - 1
• Max GPM - 21

Storm water pump stations are necessary to remove the excess of water during a rainstorm. They not only remove water, but removes waste and other solid materials. Pump Express stocks several brands and types of storm water pumps.

Additional Information (PDF):

Slim-Line Top Discharge Dewatering Pump Specification
Slim-Line Top Discharge Dewatering Pump Performance curves
Slim-Line Top Discharge Dewatering Pump Product Brochure