Rotech Self Priming Centrifugal Utility Pumps SPU 4

Rotech
Self Priming Centrifugal Utility Pumps
* Overnight Shipping Available! Part #: SPU 4

Self priming pumps are designed for economical and trouble-free operation in handling solids-laden liquids and slurries. They feature a large volute design which allows them to re-prime automatically in a completely open system without the need of suction or discharge check valves. And this is workable with the pump only partially filled with liquid and completely dry suction line. Self priming pumps are able to handle up to 75mm spherical solids, depending on pump models. In case the SPT series pump shaft or bearings need service or repair, the entire rotating assembly can be removed without disturbing pump casing or pipelines. Rotating assembly is sealed with an O-Ring, allowing for external adjustments of clearance.

Self priming centrifugal pumps effectively eliminate the requirement of valves, vacuum and ejector pumps which can get clogged or be impractical to use for prolonged operation.

SPECIFICATIONS ATTACHED BELOW

Key Features

• Impeller Diam. - 279.4mm (11 in.)
• R.P.M. - from 850 rpm to 2150 rpm
• Max Solids - 28.57 mm( 1 1/8 in.)
• Shipping Wt. - 655 lbs.

At Pump Express, we offer Rotech centrifugal pumps. Rotech centrifugal pumps have an impeller within them which revolves fluid and increases the pressure within the pump. The pressure generated creates a centrifugal force which discharges fluid from the pump. From this pressure, kinetic energy is transformed into pressure. Centrifugal pumps also lift water from lower levels to higher levels.

Additional Information (PDF):